3 Cables Tips from Someone With Experience

Posted by: headm on: January 16, 2016

Everything You Need to Know About Cable and Wire Management Systems Cable or wire management systems are simply the installation process for and way that wires and cables are secured in place. This is a huge concern for people working in the information technology, communications, and power distribution fields. These systems support the cables, contain them in a specific area, and make access for maintenance easier. A lot of variables go into deciding which system is going to be the best one to fit your needs. Before you make this decision, you will have to think about your specific needs. Each system has a different load capacity and grounding requirements that will play into your decision. The amount of cable that they system can support is called the load capacity. To determine the load capacity, look at the distance between supports and the maximum weight the system can handle. Even if you are only planning on using the system for data com wiring, you still need to think about the proper grounding for the system. Stray currents from other wires or a lightening strike need to be properly channeled through the system. They type of cable you are planning on using should also be considered. You will have to use a plenum-rated cable for systems like a cable runway or center-rail cable tray because they are open. If the wires are completely contained in an enclosed raceway or a solid-bottomed tray, then you don’t have to meet this requirement.
The Art of Mastering Products
There are also benefits and drawbacks to each type of system that you will have to think about. Solid bar, tubular, and c-channel are the three main types of runways. Solid bar runways are heavy and expensive, but they are also very strong. The easiest to install and the cheapest option is the tubular runway. C-channel runways are somewhere in-between because they are affordable without compromising quality.
The Art of Mastering Products
Once system that you might want to consider is the center rail support system. You don’t have to worry about cable pulling during installation because it is easy to put the cables in. Rod-mounting or vertically mounting are both options with this type of system. Wall-mounted, half-rack, or multitiered vertical-rack are also options you have with this type of system. The rungs used also come in many different sizes and depths which allows you to customize your track to fit your needs. If you have a specific type of material that you want it to be made out of, then that is the last consideration to think about. You can choose from things like aluminum, steel, fiberglass, or stainless steel. You are capable of picking out the best system for your needs after you have considered all of these things.

Leave a Reply

Your email address will not be published. Required fields are marked *

302 Found


The document has moved here.